How To Make My Toyota Corolla Faster

Download Article

Download Article

The Corolla is known for beingness a reliable and efficient vehicle. The car is simply the perfect vehicle for a modest family but nearly owners find it has one small-scale trouble. That trouble being that it'south slow and just doesn't have to become up and become that they are looking for. At that place is one master solution to this trouble and that is to add together a turbocharger setup to the vehicle which could potentially double the horsepower!

Steps

1. 1

   Find your kit.

   • There are many to choose from and the pick is upwardly to the driver.  One highly recommended kit is from TurboKits.com.^[1] Includes all of the necessary components to run a turbo charged set. You volition also demand to purchase a wideband O2 sensor with guess and a boost controller or boost pressure gauge. (pictured below)

2. two

   Bank check and make sure all parts are included.

   • If not, contact supplier for replacement parts because it is important that all parts are included considering the vehicle may non run.

   Advertisement

3. 3

   Remove Exhaust Manifold. ^[2]

   • Refer to (Toyota exhaust manifold removal...)

4. 4

   Remove Air intake.

5. v

   Remove front fascia and the Styrofoam bumper.

6. 6

   Access vehicle engine control unit.

   • Remove center panel and passenger glove compartment for access to the engine control unit and its wiring (ECU).
   • The wiring to the ECU runs from the ECU itself to the firewall then underneath the carpet to its respective locations.

7. 7

   Connect wires.

   • Connect respective colored wires from the Fuel ignition controller (FIC) to the vehicle (ECU). This unit of measurement will be the brains of your operation and volition be responsible for making sure the engine runs efficiently.
   • Yous can either solder all of the wire connections(permanent) or you tin can utilise quick disconnect crimps so that the car tin can be returned to stock condition.
   • Optional purchase: Fuel Ignition Controller Harness.

8. 8

   Supervene upon fuel injectors.

   • You are going to need to remove the fuel rail to complete this chore.

9. ix

   Install Intercooler.

   • The best place is to mount it beneath the forepart Styrofoam bumper

10. x

    Install charge piping.

    • The piping is already pre mandrel bent and tin only go onto the vehicle i manner at this fourth dimension is when you re install your previously existing MAF into position.

11. 11

    Install turbo exhaust manifold. ^[three]

12. 12

    Install turbo. ^[iv]

    • Bolt the turbo charger up to the new exhaust manifold.

13. 13

    Attach Downpipe. ^[five]

    • Attach the stainless steel down pipe to the exhaust housing side of the turbo charger.

14. 14

    Thread in the oil feed and return line to the turbo charger.

15. 15

    Remove oil pan.

    • You are going to need to drain the oil first to avoid a mess.

16. 16

    Install oil feed and return lines into the oil pan.

17. 17

    Re-install the oil pan.

    • Recommended to replace oil pan gasket or sealer

18. 18

    Install the wideband O2 sensor.

    • Brand sure to properly connect it to the FIC.

19. nineteen

    Install AEM Heave controller.

    • Make sure to properly connect it to the FIC.

20. 20

    Do a final check.

    • Cheque fluid levels. Test new equipment to makes certain it is all powering on correctly ex.(FIC, EBC and Wideband)

21. 21

    Commencement engine.

    • Check for any abnormalities:
      • Cheque Engine Light.
      • Stalling.
      • Rough idle.
      • Unusual noises.

Advertisement

Add together New Question

• Question

  Can I convert manual steering to automatic steering?

  

  Yes, just it'due south highly recommended that you go to a mechanic and let them do it. That's non the kind of thing an amateur should attempt on their ain.

• Question

  Tin can I add any type of turbo kit to my Corolla?

  

  All turbochargers can be accessed, but do non rely on twin turbos or superchargers. There are several options to choose from; consider some JDM brands to assist you out (e.chiliad. AEM, HKS, GReddy, etc.). Exist wise in selecting the best turbo, and consider ability output and horsepower of the auto as the factors in choosing the right one.

• Question

  Tin can I turbo charge a carburetor engine?

  

  Yes. Forced consecration of carbureted engines has been done for a very long time. Whether or not it should be attempted is an open up question.

Encounter more answers

Ask a Question

200 characters left

Include your email accost to get a bulletin when this question is answered.

Submit

Ad

• Have your fourth dimension! They do not call it building a "project automobile" for cipher.

• Highly suggested to have some type of mechanical background or experience.

• Suggested purchase would be AEM Wideband O2 sensor. It ties into the AEM FIC very well and the vehicle volition run safer

Show More than Tips

Advertisement

• Make sure that the oil feed and returns line are put into the proper position on the oil pan. If the lines are put to close to the tiptop you adventure not getting the proper oil feed to your turbo.

• Turbo charging a vehicle is non just as simple every bit bolting the parts on and driving away. At that place are a lot of parts that should just exist performed by someone who has a background in mechanics and working on vehicles to insure the safety of the driver

• Do not drive the vehicle hard before driving approximately 100-200miles of average use. All of the new turbocharging parts demand time to interruption in and settle before they are put to good use

• DO not damage the MAF sensor. Vehicle may not run properly. It should be cleaned and installed into the new air intake organization.^[6]

Advert

Things You'll Demand

• Turbo Kit
  • Turbo charger
  • Turbo manifold
  • Engine management unit
  • Inter-cooling with pipe and couplers
  • Larger injectors (highly recommended)
  • Turbo Downpipe
  • Air filter
  • Oil feed and return lines
  • Boost Estimate or controller
  • Air/Fuel ratio gauge
• AEM Wideband O2 Sensor
• AEM Heave guess or AEM Boost Controller(Preferred)

Almost This Article

Thanks to all authors for creating a folio that has been read 82,690 times.

Did this article aid you?

Source: https://www.wikihow.com/Turbo-Charge-a-Corolla

Share this post